Rubber Coat

Availability: In stock

An extremely flexible, heavy-textured water-based coating which has rubber incorporated into the system. Durable and suitable for a variety of applications including waterproofing, stone protection and anti-slip.

Register My 7/10 Year Guarantee
Guarantee Terms & Conditions
 

Product Specs:

Available in 5 and 20-litre packs.

Colours:

  • Black
  • Grey

Technical Data Sheet

CODE:
TRC

DESCRIPTION
Rubbercoat is a multi-purpose flexible waterproofing system of exceptional quality and versatility. Used as a general purpose waterproofing system for parapet walls, flat roofs, gutters, flashings etc. Can be used on new and previously painted surfaces.

PRODUCT BENEFITS:
Built-in reinforcement and ready for use. More advantageous than bitumen type waterproof coatings. Easy application. Clean up with water.

SURFACE PREPARATION:
Surface to be painted must be thoroughly clean, dry and free from loose flaking paint, algae, dirt, grime or any other foreign contaminants. Large cracks and holes must be made good with approved adhesive filler. Corroded metal surfaces must be correctly prepared and primed with Dekade Rust and Metal Primer. Gloss enamel surfaces must be well sanded to remove the gloss and achieve a smooth matt surface. Wash all surfaces with sugar soap and water.

Previously Painted Surfaces:
Surface must be in a sound condition. Roof surfaces showing signs of
flaking must be stripped. All chalky and powdery surfaces to be thoroughly
sanded and hosed down. Surfaces with algae, lichen, moss etc must be
cleaned using a high pressure water spray or by wetting the roof with clean
water and applying a copper sulphate and water mixture, followed by
scrubbing.

GENERAL:
Do not use during cold and wet weather. Whilst Rubbercoat is designed to give extended life, it is still advisable to give a maintenance coat every 2 – 3 years. Full cure is only reached after 7 days. Do not use powder fillers or cement for filling.

APPLICATION
Stir thoroughly with flat paddle before use. Ready for use by brush or roller. Thinning – DO NOT THIN. Clean up with water.

TECHNICAL DATA:
Type: Acrylic copolymer with selected reinforcement
Drying T ime: (T) 2 Hours
@ 25oC (H): 24 Hours
Recoat: 4 Hours
Full Cure: 7 Days
Viscosity: 110 – 120 KU
SG: 1.09 – 1.12
Solids by Volume: 37 – 40%
Spread rate: Approx. 1m2/L depending on surface profile and porosity.
Solids by Mass: 60 – 62%
Flashpoint: Non-flammable
Colour Range: Grey and Black
Pack Sizes: 5lt & 20lt
Finish: Sheen
Appearance: Heavy Texture

Health and Safety: Refer to Material Safety Data Sheet

Download Technical Data Sheet

Reviews

Be the first to review “Rubber Coat”

Contact a Store

Pietermaritzburg, Midlands (Retail)
Morne van Straaten: 076 501 1429
morne@dekadepaints.co.za

North Coast (Retail/Trade)
Prem Gokulpersad: 082 807 9102
premg@dekadepaints.co.za

South Coast (Retail/Trade)
Property Administrators & Specifications
Jill Pinto: 082 499 2172
jill@dekadepaints.co.za

Trade Enquiries
Tracy Robinson: 082 417 9050
manager@dekadepaints.co.za

Case Studies Projects