Availability: In stock

An economical base coat for interior use only, prior to the application of acrylic top coats. Reduces plaster imperfections. About 7m²/l.

Register My 7/10 Year Guarantee
Guarantee Terms & Conditions

Product Specs:

  • Available in 5 and 20-litre packs
  • Colour: White only

Technical Data Sheet


Dekade Trade Fillercoat is an interior fillercoat for wood floated plaster where filling is required before top coating with various water based finishing coats, e.g. Trade Super Matt. Can also be used as a low cost finishing coat for interior use.

A high solids Acrylic Fillercoat. Good filling properties.
Easy application with brush or roller. Quick drying.

Surface to be painted must be thoroughly clean, dry and free from all foreign contaminants. All bare metal areas e.g. nail heads, must be primed with the appropriate primer. For rough concrete apply one or two coats depending on the degree of filling required. Best for interior use only.

Do not apply to unprimed metal and wooden surfaces.
Not recommended for exterior use.

Stir thoroughly with flat paddle before use. Ready for use by brush, roller or airless spray. Thinning not normally necessary as thinning will reduce opacity and filling properties. Clean up with water.

Type: Acrylic PVA Copolymer
Flashpoint: Non flammable
Colour Range: White
Pack Sizes: 5lt & 20lt
SG: 1.44 – 1.46
Drying T ime: (T) 1 Hour
@ 25oC (H): 4 Hours
Recoat: 2 Hours
Viscosity: 100 – 105 KU
Solids by Volume: 29 – 32%
Spread rate: At 75 microns dry film thickness, approx. 5m2/L
Solids by Mass: 48 – 52%
Finish: Matt

Health and Safety: Refer to Material Safety Data Sheet

Download Technical Data Sheet


Be the first to review “Fillercoat”

Contact a Store

Pietermaritzburg, Midlands (Retail)
Morne van Straaten: 076 501 1429

North Coast (Retail/Trade)
Prem Gokulpersad: 082 807 9102

South Coast (Retail/Trade)
Property Administrators & Specifications
Jill Pinto: 082 499 2172

Trade Enquiries
Tracy Robinson: 082 417 9050

Case Studies Projects