Available in 500ml, 1 and 5 litre-packs.
Technical Data Sheet
Dekade Zinc Phosphate Primer is ideal for use on iron and steel.
Good quality and excellent corrosion resistant metal primer.
Non-toxic. Quick drying. Ready for use.
Surfaces must be clean and dry. Mill scale must be removed by sandblasting to SA 2.5 Swedish Standard. Surface rust must be removed by wire brushing.
Previously painted surfaces:
Loose and flaking paint must be completely removed and bare exposed areas must be spot primed with Dekade Zinc Phosphate Primer.
Do not leave for long periods before overcoating.
Do not apply to rusty unprepared metal surfaces.
Stir thoroughly with flat paddle before use. Ready for use by brush or roller. Brush application preferred to ensure thorough wetting of surface. Clean up with Mineral Turpentine.
Type: Alkyd based containing non-toxic, anti-corrosive pigments
Drying T ime: (T) 4 Hours
@ 25oC (H): 16 Hours
Recoat: 16 Hours
Viscosity: 60 – 65 KU
Solids by Volume: 36 – 39%
Spread rate: Approx. 10m2/Lt
Solids by Mass: 68 – 70%
Recommended DFT: 30 – 40 micron
Colour Range: Red Oxide
Pack Sizes: 500ml, 1lt, 5lt
SG: 1.31 – 1.33
Health and Safety: Refer to Material Safety Data Sheet