Available in 5-litre packs.
- Cherry Glow
- Rich Mahogany
- Rose Wood
Technical Data Sheet
A water based wood stain providing a decorative effect for all interior wood. Suitable for most interior wood including furniture, tables, doors, skirting, panelling, picture frames, boxes etc. Tailored for line manufacturing of knock down furniture.
Enables the creation of many modern decorative effects such as dragging, ragging, sponging and colour washing. Quick and easy way to colour interior wood. Quick drying with exceptional flow. Easy application with brush, sponge or dip. Low odour. Non-toxic. Easy clean-up with water.
NEW: Ensure surface is dry and free from any contamination. Sand to smooth finish. Dust down, apply one or more coats as desired allowing 1 hour drying time between coats. PREVIOUSLY VARNISHED: Strip back to bare wood. Wipe down with Mineral Turps or Lacquer Thinners to remove any paint remover residue. Proceed as for new work.
Do not apply to wet/damp timber. Allow sufficient time for end grain absorption to ensure proper wood protection. Allow minimum 24 hours drying time before over coating with solvent based top coats. Trial application is recommended before commencing. Not recommended for exterior use (exposure to direct sunlight).
Stir thoroughly with flat paddle before use. Ready for use. For dip, brush or wipe on application. Dilute with clean water if necessary. One coat normally sufficient. Final colour dependent on original colour and condition of wood and the number of coats applied.
Type: Acrylic emulsion
Drying Time: (T) 10 minutes
@ 25oC (H): 10 minutes
Recoat: 1 Hour
Viscosity: 15 – 20 seconds Ford Cup 4 @ 25°C
Spread Rate: Approx. 8 – 12m2/L depending on surface profile and porosity.
Colour Range: White, Cherry Glow, Rosewood & Rich Mahogany
Pack Size: 1L & 5L
Health and Safety: Refer to Material Safety Data Sheet