Super Bright Aluminium
A general-purpose, high-lustre aluminium paint providing excellent durability to all primed metal and wooden surfaces. Excellent as a roof paint where its ability to reflect heat considerably reduces the inside temperature.
Available in 500ml, 1, 5 and 20-litre packs.
Technical Data Sheet
Trade Super Bright Aluminium is a general purpose high lustre aluminium paint. Used for all interior/exterior primed metal and wooden surfaces where an aluminium finish is required. Excellent as a roof paint where its ability to reflect heat reduces the temperature inside the building.
Excellent durability. Reflects heat.
Improves illumination – good reflector of light.
Surfaces must be clean, dry and free from any surface contamination.
GALVANISED IRON: Fabricator’s pre-treatment must be completely removed with Galvanised Iron Cleaner. Prime with WB Galvanised Iron Primer before applying Super Bright Aluminium. ALUMINIUM: Degrease then prime with Trade Etch Primer.
FERROUS METALS: Loose surface rust must be removed by wire brushing. Mill scale must be removed by abrasive blast. Prime with Zinc Phosphate Primer then Trade Undercoat.
CEMENT: Prime with Trade Plaster Primer then Trade Undercoat.
WOOD: Prime with Trade Pink Wood Primer then Trade Undercoat.
FIBRE CEMENT: Apply 1 coat Trade Bituminous Aluminium.
Do not paint in cold and wet conditions. Do not apply to unprimed metal surfaces. Not suitable for surfaces which exceed 100°C.
Stir thoroughly with flat paddle before use. Ready for use with brush or roller. For spray application, thin with mineral turps. Clean up with Mineral Turps.
SG: 0.93 – 0.96
Drying Time: (T) 4 Hours
@ 25oC (H): 16 Hours
Recoat: 16 Hours
Viscosity: 30 – 40 seconds Ford Cup 4
Spread Rate: Approx. 18m2/L depending on surface profile & porosity.
Solids Volume: 30 – 35%
Solids Mass: 50 – 55%
Recommended DFT: 15 – 20 micron
Colour Range: Aluminium
Pack Size: 500ml, 1L, 5L, 20L
Health and Safety: Refer to Material Safety Data Sheet