An economical gloss paint for concrete floors and window sills.
Available in 500ml, 1 and 5-litre packs.
Technical Data Sheet
An economical high gloss finish for direct application to new interior / exterior clean, dry wood floated cement, concrete floors & window sills. Can be applied to previously painted clean, dry and wax free surfaces.
Hard wearing and easy to clean. Easy to repaint when necessary. Prevents disintegration of cement floors.
NEW: Surfaces must be clean, dry and sound. Allow to dry for a minimum of 6 weeks before painting. Acid etch smooth surfaces to provide a “key”
OLD UNPAINTED: Scrub surfaces using dekade Trade Degreaser to remove dirt, oils, fats, grease etc. Rinse with plenty of water and allow to dry. Acid etch smooth surfaces.
Previously Painted Surfaces:
Surfaces must be clean, dry and in sound condition before painting. All loose flaking paint must be removed. Rub entire surface with an abrasive paper to provide a “key”. Remove wax using Dekade Trade Degreaser, wash down with water and allow to dry.
Allow at least 24 hours after final coat before walking on floor. Do not apply to wet or damp surfaces. Not recommended for garage floors where spillage of oils & solvents may occur.
Stir with flat paddle before use. Ready for use by brush or roller.
Thinning – Not necessary except for spray application.
Clean up with Mineral Turpentine or Dekade Trade Degreaser.
Type: Alkyd based
Drying T ime: (T) 4 Hours
@ 25oC (H): 24 Hours
Recoat: 16 Hours (overnight)
SG: 1.00 – 1.02
Viscosity: 60 – 65 KU
Solids by Volume: 33 – 35%
Spread rate: Approx. 8m2/Lt depending on substrate porosity.
Gloss Level: Gloss
Solids by Mass: 43 – 46%
Pack Sizes: 500ml, 1lt, 5lt
Colour Range: Black, Grey, Green and Red Oxide
Recommended DFT: 20 – 30 microns
Health and Safety: Refer to Material Safety Data Sheet