DEKADE Gold Label Matt is a luxurious, durable and washable pure acrylic wall coating, that dries to a silky-smooth matt finish. It offers excellent wear and dirt resistance, and is suitable for interior / exterior application, where a low odour and a quick-dry, matt finish is required.
- Stir thoroughly with a flat paddle before use.
- Apply with brush, roller or airless spray.
- Apply a minimum of 2 coats to achieve full cover and an even finish.
- Allow 4 hours drying time between coats.
- Clean up with water.
- Squeeze excess paint from the brush or roller.
- Clean equipment with warm, soapy water.
- Do not clean painted surfaces within 7 days of application.
- Ideal drying temperature: 25°C.
- Touch dry: 2 hours.
- Recoat time: 4 hours.
- Hard dry: 8 hours.
- Full cure: 7 days.
Advised to be 10 m2 per litre, and is *dependent on porosity and profile of the surface.
HEALTH AND SAFETY:
For detailed safety information refer to Material Safety Data Sheet. Keep out of reach of children. Ensure good ventilation during application and drying. Non-flammable.
NEED MORE INFORMATION? TECHNICAL INFORMATION
Download Technical Information
For customer queries e-mail us at firstname.lastname@example.org
Technical Data Sheet
Waterbased Satin Magic is a premium quality, non-drip enamel which offers high build brush loading and non-sag properties. Can be used on new or previously painted surfaces such as doors, window frames, cupboards, skirting boards, furniture and walls.
Very convenient. No runs and no mess. Quick drying. Dries to an attractive, tough, washable sheen finish. Equipment easily cleaned in water. Superior, non-yellowing trim paint for interior/exterior use. Low odour and mould resistant.
Loose flaking paint and efflorescence must be completely removed. All bare exposed metal areas must be spot primed with the appropriate primer and undercoat. Gloss/oil paint surfaces to be thoroughly sanded and wiped down with damp cloth. Chalky surfaces must be thoroughly sanded before applying Dekade Surface Conditioner. Kitchen walls without exception to be washed down with sugar soap and water.
Do not apply during cold, wet conditions.
Do not apply directly to unprimed metal surfaces.
Not recommended for high moisture areas.
Supplied ready for use in a GEL form. DO NOT STIR. If shaken or stirred allow to stand overnight to regain its gel structure. Brush application preferred. Dip brush 1 – 2 times into the gel until brush is loaded, then commence painting in a normal manner. A minimum of 2 coats is required for best results. Do not dilute. Clean up with water.
Type: Acrylic copolymer.
Drying Time: (T) 2 hour
@ 25oC (H): 8 hours
Recoat: 4 hours
Full Cure: 7 days
Viscosity: Gel Structure
Solids Volume: 34 – 36%
Solids Mass: 47 – 50%
Spread Rate: Approx. 10 – 12m2/Lt depending on surface profile and porosity.
Colour Range: White, Pastel and Deep Bases
SG: 1.22 – 1.25
Pack Size: 1L & 5L
Health and Safety: Refer to Material Safety Data Sheet