- Available in 1 and 5-litre packs
- Options: Paint Remover, PVA Paint Remover
Technical Data Sheet
Trade Paint Remover strips all solvent based decorative and many industrial coating products. Used to strip previously painted/varnished wood, plaster and metal surfaces. Removes most catalysed finishes. Can NOT be used on plastics.
Water rinseable. Low wax causes no drying problems.
Non-flammable. Makes stripping of existing paint easy.
Apply a liberal coat and leave for approximately 10 – 15 minutes or until paint has wrinkled. Scrape off softened paint. Repeat until all paint has been removed. Rinse or hose off with water. Allow to dry before wiping off with Mineral Turpentine/Lacquer Thinners.
Wear gloves and goggles. In case of accidental contact with skin wash immediately with water. In case of eye contact, wash eyes with copious amounts of clean water and seek medical advice. Apply in well ventilated area. Store in a cool safe place – away from any heat source and out of reach of children. Care must be taken when opening these containers as there could be a build up of pressure in the can. Cover opening with a heavy cloth before breaking the seal.
Ready for use with brush. Apply generously. Thinning not required.
Clean up/rinse with water then wash in Mineral Turpentine.
Type: Methylene chloride, with wax, thickener and accelerators
Spread Rate: Approx. 2 – 4m2/L depending on surface profile.
Pack Size 500ml, 1L & 5L
Health and Safety: Refer to Material Safety Data Sheet