- Fully washable
- Low sheen
Available in 5 and 20-litre packs.
- Deep Base, Pastel Base, Transparent Base
Technical Data Sheet
Low Sheen is a quality fully washable interior/exterior pure acrylic wall coating that dries to a low sheen finish. Suitable for direct application to new and previously painted plaster, fibre cement and composition boards. Can be used with confidence in homes, hotels, flats and other areas that require a fully washable, durable, stain resistant, low sheen paint.
Easily applied by brush, roller or airless spray. Quick drying. Low odour. Non-yellowing. Easy clean up with water.
Surface to be painted must be thoroughly clean, dry and free from all foreign contaminants. Loose, flaking paint and efflorescence must be completely removed from previously painted surfaces. All bare exposed metal areas must be spot primed with the appropriate primer and undercoat. Gloss and oil paint surfaces to be thoroughly sanded and wiped down with damp cloth. Chalky surfaces must be thoroughly sanded before applying 1 coat Plaster Primer diluted 10% with Mineral Turpentine. Kitchen walls without exception to be washed down with sugar soap.
Do not apply in cold and wet weather conditions.
Do not apply to unprimed metal surfaces.
Stir thoroughly with flat paddle before use. Ready for use by brush, roller or airless spray. Thinning not normally necessary. Clean up with water.
Type: Pure Acrylic.
Drying Time: (T) 1 hour
@ 25oC (H): 4 hours
Recoat: 4 hours
Finish: Low Sheen
Viscosity: 100 – 110 KU
Solids Volume: +/- 31%
Solids Mass: +/- 47%
Spread Rate: Approx. 10m2/Lt depending on surface profile and porosity.
Colour Range: White and tint bases
SG: +/- 1.30
Pack Size: 5L & 20L
Health and Safety: Refer to Material Safety Data Sheet