A multi-purpose “clear gloss” sealer used over paint techniques and textured coatings to improve washability. Suitable for correctly prepared and primed mild steel, galvanised iron and gypsum plaster. Suitable for interior and exterior use. High sheen finish.
- Available in 1 and 5-litre packs
- Available in Gloss only
TECHNICAL DATA SHEET
Glazecoat Gloss is a water based pure acrylic blend with excellent clarity and hardness. Recommended for interior/exterior surfaces where a sheen and durable finish is required. Imparts a durable dirt resistant coating.
Provides a non-yellowing film with long term wear resistance. Imparts aesthetic appeal over other finishes. Easy to apply by brush or roller. Resists dirt collection and makes cleaning easier.
Surfaces must be clean and dry. Apply 1 – 2 coats.
1 coat is sufficient for general maintenance.
Do not apply during cold, wet conditions.
Do not apply directly to unprimed metal surfaces.
Not suitable for floors.
Stir thoroughly with flat paddle before use. Ready for use by brush or
roller. Thin with clean water for spraying. Clean up with water.
Type: Pure acrylic polymer.
Drying Time: (T) 1/2 – 1 hour
@ 25oC (H): 4 hours
Recoat: 4 hours
Viscosity: 50 – 60 seconds Ford Cup 4
Solids Volume: 18 – 22%
Solids Mass: 31 – 33%
Spread Rate: Approx. 10m2/Lt depending on surface profile and porosity.
Colour Range: Clear
SG: 1.01 – 1.05
Pack Size: 1L & 5L
Health and Safety: Refer to Material Safety Data Sheet