Galvanised Iron Cleaner
A multi-purpose abrasive cleaning paste suitable for removing wax, oil, grease and soot from a variety of surfaces, Galvanised Iron Cleaner is an essential cleaner for removing fabricators pre-treatment from new unweathered galvanised iron.
Available in 1 and 5-litre packs.
TECHNICAL DATA SHEET
A multi-purpose “semi paste” abrasive cleaning agent. Ideal for removing fabricator’s wax from galvanised iron. Ideal cleaner for removing soot and chalk from old epoxies and will provide a good key (because of its abrasive nature) for subsequent coatings.
Excellent abrasive cleaner for all non-ferrous metals and old epoxies. Supplied in semi-paste form for easy application. Washes off easily with water.
Thoroughly mix/stir with flat paddle before use. Apply liberally with brush and allow to stand for 10 minutes. Rub/scrub vigorously with scouring pads/rags. Wash off residue with clean water. Repeat where necessary until a water-break free surface is achieved.
Rubber gloves recommended to protect hands.
Not suitable for ferrous metals.
Apply with brush. Thinning not required. Clean up with water.
Type: Balanced blend of solvents, detergent and silica
Spread rate: +/- 15m2 per litre depending on the galvanised iron.
Pack Sizes: 1L & 5L
Health and Safety: Refer to Material Safety Data Sheet