Available in 1 and 5-litre packs.
- Venetian Red
TECHNICAL DATA SHEET
Flexoseal is a two part multi-purpose flexible waterproofing system of exceptional quality and versatility. For parapet walls, flat roofs, gutters, flashings, etc. Can be used on new and previously painted surfaces.
More advantageous than bitumen type coatings.
Easy application. Clean up with water.
Surface to be painted must be thoroughly clean, dry and free from loose flaking paint, algae, dirt, grime and other foreign contaminants. Cracks and small holes must be made good. Corroded steel and galvanised iron must be correctly prepared and primed with Dekade Rust and Metal Primer. Gloss enamel surfaces must be well sanded with coarse sandpaper to remove the gloss. Wash all surfaces with sugar soap and allow to dry.
Not to be used during cold and wet weather. Flexoseal membrane must be completely saturated and free of bubbles, creases and wrinkles. Whilst Flexoseal is designed to give extended life it is still advisable to give a maintenance coat every 2 -3 years. Full cure is only reached after a minimum of 7 days. Do not apply to metal surfaces, which have not been correctly prepared and primed. Do not apply to unsealed porous surfaces and in areas subject to continous ponding.
Stir with flat paddle before use. Ready for use by brush or roller.
Thinning – water – not normally necessary. Clean up with water.
Type: Acrylic copolymer
Drying T ime: (T) 4 Hours
Hard Dry: 24 Hours
Recoat: 24 Hours
Full Cure: 7 Days
SG: 1.17 – 1.18
Viscosity: 100 – 110 KU
Solids by Volume: 33 – 36%
Spread rate: Approx. 2m2/Lt if used with membrane.
Gloss Level: Sheen
Solids by Mass: 46 – 50%
Pack Sizes: 1lt, 5lt & 20lt
Colour Range: White, Grey, Charcoal, Venetian Red, Terracotta & Brown
Health and Safety: Refer to Material Safety Data Sheet