Epoxy Floor Primer/Sealer
A durable twin-pack protective coating with high chemical and water resistant properties, ideal for use in workshops, showrooms and other industrial floors.
Available in 5-litre packs.
- Clear Gloss
- Dark Grey, Dekade Grey, Light Grey, Grey
Technical Data Sheet
Dekade Trade Epoxy Floor is a superior twin pack Epoxy Primer/Sealer for interior surfaces requiring a tough durable finish. May be used on concrete, wood and metal surfaces. May also be used on exterior surfaces but gradual chalking will occur.
Good chemical and water resistance. Gloss finish. Easy to apply with good flow and levelling. Resistant to mild acids and alkali. Resistant to aromatic and aliphatic solvents.
All surfaces must be clean, dry and free from all foreign contaminants. Unpainted Metal surfaces must be cleaned well, acid etch and wash well with plenty of water to remove acid residue and allow to dry.
Previously Painted Surfaces:
Paint in a deteriorated state should be stripped back to the original surface. Paint in a good condition should be well sanded. Wipe off all sanding residue and wipe down with a dry cloth or blow dry. Patch prime all bare metal areas with Trade Etch Primer.
Do not apply over alkyd enamels. Do not apply in wet or damp conditions.
Do not apply directly to unprimed metal surfaces. Limited pot life.
Do not mix more than the volume to be used within 8 hours.
Ready for use when mixed with the catalyst. For application by spray, brush or roller. Thin with Dekade Epoxy Thinners for spraying. Clean up with Dekade Epoxy Thinners.
Type: Twin Pack Epoxy
Drying Time: (T) 8 Hour
@ 25oC (H): 7 Days
Recoat: 24 Hours
Mixing Ratio: 4 Base : 1 Catalyst
Pot Life: 8 Hours
Solids by Volume: 30 – 35%
Spread rate: Approx. 8 – 10m2/L
Solids by Mass: 35 – 40%
Flashpoint: 13°C (Base) , 13°C (Catalyst)
Colour Range: Clear
Pack Sizes: 5lt
Recommended DFT: 25 – 30 microns
Health and Safety: Refer to Material Safety Data Sheet