Specifically recommended for application to dry new plaster, ceiling boards, brick, concrete, fibre cement and various types of composition boarding. Suitable as a primer/sealer for penetrating and binding powdery surfaces.
- Alkali-resistant with good sealing properties
- Low odour, leaving no unpleasant fumes, leading to a quick reoccupation of premises
- Acts as a primer and sealer
- Easy wash with water
- Available in 5 and 20-litre packs
- Colour: White
Technical Data Sheet
Eco-friendly primer for interior/exterior use. Specifically recommended as a primer for new dry plaster and other gypsym based products, brick, concrete, fibre cement and various types of composition boarding. Suitable as a primer/sealer for penetrating and binding powdery surfaces.
A low VOC, high hiding water based white plaster primer. Exhibits good alkali resistance with good sealing properties. Low odour. No obnoxious fumes. Acts as a primer and sealer. Quick drying. Easy clean up with water. Environmentally friendly.
Surfaces must be clean, dry and free from all foreign contaminants. New plaster moisture content not to exceed 15% before application.
Powdery, chalky surfaces must be thoroughly wire-brushed/sanded. All loose and flaking paint to be removed.
Not to be used as a primer on metal. Optimum results achieved if moisture content does not exceed 15% on masonry surfaces. Do not paint during wet or cold weather.
Stir thoroughly with flat paddle before use. Ready for use by brush or roller or airless spray. Brush application preferred for chalky surfaces. Thin up to 15% with clean water for chalky surfaces. Clean up with water.
Type: Acrylic Emulsion Primer
Drying T ime: (T) 1 Hour
@ 25oC (H): 2 Hours
Recoat: 2 Hours
SG: 1.40 – 1.42
Viscosity: 95 – 100 KU
Solids by Volume: 40 – 42%
Spread rate: Approx. 8m2/Lt
Solids by Mass: 62 – 64%
Flashpoint: Non flammable
Colour Range: White
Pack Sizes: 5lt & 20lt
Health and Safety: Refer to Material Safety Data Sheet