Ideal for use on interior and exterior walls and ceilings, Dekade Acrylic PVA is a quality general purpose acrylic PVA with a matt finish.
Available in 1, 5 and 20-litre packs.
- Deep Base, Pastel Base, Transparent Base
Technical Data Sheet
Acrylic PVA is a good quality washable interior/exterior matt emulsion. Suitable for direct application to new and previously painted plaster, composition board, fibre cement, wood and metal surfaces that have been correctly prepared and primed.
Easily applied by brush, roller and airless spray. Quick drying. Low odour. Equipment easily cleaned in water. Non-yellowing white.
Loose flaking paint and efflorescence must be completely removed. All bare exposed metal areas must be spot primed with the appropriate primer and undercoat. Gloss/oil paint surfaces to be thoroughly sanded and wiped down with damp cloth. Chalky surfaces must be thoroughly sanded before applying Dekade Surface Conditioner. Kitchen walls without exception to be washed down with sugar soap and water.
Do not apply during cold, wet conditions. Do not apply directly to unprimed metal surfaces.
Stir thoroughly with flat paddle before use. Ready for use by brush, roller and airless spray. Thinning not normally necessary. Clean up with water.
Type: Acrylic copolymer.
Drying Time: (T) 1 hour
@ 25ºC (H): 4 hours
Recoat: 2 hours
Viscosity: 90 – 95 KU
Solids Volume: 30 – 32%
Solids Mass: 48 – 52%
Spread Rate: Approx. 8m2/Lt depending on surface profile and porosity.
Colour Range: White & Tint Bases
SG: 1.38 – 1.42
Pack Size: 1L, 5L & 20L
Health and Safety: Refer to Material Safety Data Sheet