Available in 1 and 5-litre packs.
Technical Data Sheet
A high solids bitumen paint that is ideal for coating of chassis and under carriages of vehicles and trailers. For direct application to any clean surface where a low cost protective coating is required. May be used for sealing absorbent surfaces such as fibre cement.
Impervious to moisture and chemicals. Low cost. Acceptable sheen finish.
No elaborate surface preparation necessary. Surface must be clean and dry. Apply 2 coats for new work, depending on severity of conditions. Do not overwork the brush on recoating as the coating is easily re-dissolved. For general maintenance or to seal absorbent surfaces, apply 1 coat.
Do not expose to direct sunlight. Top coating with decorative coatings will result in “bleeding” of the bitumen. Not resistant to solvents.
Stir well with flat paddle before use. Ready for use with brush or roller. For spray application only – thin with Mineral Turpentine. Clean up with Mineral Turpentine or Trade Degreaser.
Drying Time: (T) 2 – 4 Hours
@ 25oC (H): 6 – 8 Hours
Recoat: 8 Hours
Viscosity: 80 – 85 KU
Solids by Volume: 68 – 72%
Solids by Mass: 72 – 74%
Spread Rate: Approx. 10m2/L depending on surface porosity
SG: 0.89 – 0.92
Gloss Level: Sheen
Pack Size: 1L & 5L
Health and Safety: Refer to Material Safety Data Sheet