Bathroom Ceiling Paint

A premium quality, fully washable, matt coating suitable for direct application to concrete, cement plaster, plaster boards and previously painted surfaces.

Properties:

• Water, steam and fungi-resistant
• Non-yellowing

Product specs:

Available in 1 and 5-litre packs
Colour: White

Technical Data Sheet

CODE:
BRC

DESCRIPTION:
Specially formulated for the painting of bathroom ceilings.

PRODUCT BENEFITS:
Outstanding adhesion – will adhere to new and old alkyd enamels,
concrete/plaster, brick and difficult chalky surfaces. No problem with
drying. Will even dry at -20°C to 40°C. Excellent recoating – can be
recoated after 4 hours drying time and at any time during its life.
Outstanding durability. Resists moisture, alkali, industrial fumes, UV
light & microbiological attack. Fast drying allows use of bathroom after
4 hours of drying. Easy application by brush, roller or spray.
Formulated with PLIOLITE^TM resins from ELIOKEM^TM.

SURFACE PREPARATION:
Surface to be painted must be thoroughly clean, dry and free from all foreign contaminants. CONCRETE/CEMENT: Large cracks and blow holes must be filled in normal manner. Apply 1st coat diluted up to 25% with Mineral Turps. GYPSUM PLASTER/ FIBRE CEMENT: Thin 1st coat up to 25% with Mineral Turps. CHALKY PVA: Sand down all loose powder and remove all flaking paint. Thin 1st coat 10 – 25% with Mineral Turps depending on the severity of chalkiness. ENAMEL SURFACES: Very lightly rub with 320 grit paper to a matt finish and wipe down with a damp cloth. Apply Bathroom Ceiling Paint undiluted.

PRECAUTIONS:
Not recommended for surfaces which exceed 60°C.

APPLICATION:
Stir thoroughly with flat paddle before use. Ready for use by brush, roller and airless spray. 2 – 3 coats required. Allow a minimum of 4 hours drying time between coats. Thin up to 25% when applying to porous and chalky surfaces.

TECHNICAL DATA: 
Type: A paint based on PLIOLITE^TM resins.
SG: 1.28 – 1.30
Drying Time: (T) 1 hour
@ 25oC (H): 24 hours
Recoat: 4 hours
Finish: Matt
Viscosity: 75 – 80 KU
Solids Volume: 34 – 36%
Solids Mass: 58 – 62%
Spread Rate: Approx. 8m2/Lt depending on surface profile and porosity.
Flashpoint: 37°C
Colour Range: White
Pack Size: 1L & 5L
Resistant Properties: Chemical Fumes – Excellent; Microbial Attack – Excellent
Health and Safety: Refer to Material Safety Data Sheet

Download Technical Data Sheet