Alkyd Interior Varnish

Availability: In stock

An economical gloss varnish for all interior wooden surfaces.

Register My 7/10 Year Guarantee
Guarantee Terms & Conditions

Product Specs:

Available in 500ml, 1 and 5-litre packs
Colour: Clear

Technical Data Sheet


A general purpose varnish used on all interior wooden surfaces where a high gloss durable finish is required.

Compares favourably with conventional varnishes with regard to interior durability. Gives a good full gloss with a high degree of acceptance.

NEW: Surface must be clean, dry and well sanded. Thin first coat 15 – 20% with mineral turps. Second and third coats should be applied undiluted. PREVIOUSLY VARNISHED: Surfaces in sound condition should be well sanded. Surfaces which are flaking and cracked must be stripped back to bare wood and proceed as for new wood.

Not recommended for exterior use as it does not contain ultra violet light absorbers. Do not apply to wet/damp timber. It is important to varnish the end grain.

Ready for use by brush. Thin up to 20% with mineral turps for spray application. Clean up with mineral turps.

Type: Alkyd based
SG: 0.85 – 0.92
Drying Time: (T) 4 Hours
@ 25oC (H): 24 Hours
Recoat: 16 Hours (overnight)
Viscosity: 90 – 100 seconds Ford Cup 4 @ 25°C
Spread Rate: Approx. 12m2/L depending on surface profile and porosity.
Flashpoint: 37°C
Solids Volume: 40 – 44%
Solids Mass: 52 – 55%
Health and Safety: Refer to Material Safety Data Sheet
Finish: High Gloss
Colour Range: Clear transparent high gloss
Pack Size: 500ml, 1L & 5L

Download Technical Data Sheet


Be the first to review “Alkyd Interior Varnish”

Contact a Store

Pietermaritzburg, Midlands (Retail)
Morne van Straaten: 076 501 1429

North Coast (Retail/Trade)
Prem Gokulpersad: 082 807 9102

Trade Enquiries
Tracy Robinson: 082 417 9050

Case Studies Projects